Icom 756 Pro 3 Serial Numbers

Posted on by

ICOM IC-756 Pro III product reviews by real people like you. I put a SM30 Icom desk on both radios. The pro 3 is now my main radio and the 7300 my back up. Could someone clue me in to the latest serial numbers on the 756Pro II? I am going to buy one and want to make sure I get a late serial number. ICOM IC-756, ICOM IC-756PRO, 756. Serial number for my Pro is 1698. My only fear is that ICOM made changes that impact measurement numbers. 756 PRO III's. Oct 29, 2013  So here is the quandary: You bought in good faith the power supply, speaker and radio, IC-756 Pro-III and the serial numbers match what you have posted. You will probably have to narrow it down with serial numbers and purchase dates from others. In searching around, I don't see anything to suggest that there is anything to decode from an Icom serial number.

Icom 756 Pro 3

Icom 756 pro 3 mars mod

ICOM 756 and 756PRO W8WWV - ICOM 756 and 756PRO (and PRO II) Greg Ordy Last Update: Wednesday, February 26, 2003 05:59 PM I decided to replace my ICOM 756 with a 756PRO. This gave me an opportunity to compare both radios side-by-side. This page contains my observations. Additional 756PRO information can be found on the pages maintained by,,, the ICOM reflector (mailing list) at, the and of course, the site. If you have any of your own observations, please email me, and I will add them to the list if appropriate. ICOM introduced the PRO II radio in the second half of 2001.

As of this writing, the radio is still quite new, and comments and observations are just starting to emerge. A few of my observations are contained at the. Because I am comparing two radios here, it may appear as if one is good and one is bad.

I really do not want to give the impression that either radio is bad. In fact, given the cost difference between the two radios, I think that both are well worth their respective prices.

Ic-756 Pro Iii Serial Numbers

For me, I decided that the upgrade cost made sense because of the equivalent cost of the filters necessary to turn a 756 into a PRO. Of course this is not even possible because the 756 has a single filter slot at each IF frequency. But if there were more slots, it seems as if I would need to add 6 or so filters to be able to get the SSB and CW selectivity choices I would like. At $100 to $200 (USD) per filter, the cost difference between the radios evaporates. On top of that, there is the color display and a number of other enhancements. Neo geo games free download for pc full version windows 7.

So, for me, spending the extra money made sense. • • • • • • • • • • • • • • • • • • • • • • • I think we have all learned that S meters are, at best, relative signal strength indicators. S Units are not a standard. S meters are not calibrated against an absolute signal strength reference. Still, they are all we have to measure signals, and they are often quoted. With two radios it's very easy to compare how each reports signal strength. On both radios, the difference between S8 and S9 appears to be 6 dB, a typical value.

Icom 7600

Above S9, the meter readings are fairly accurate, which is to say that meter markings track real relative decibel changes. Lenovo yoga sound driver download Below S8, both meters becomes increasingly more sensitive. The difference between S1 and S2 may be as little as one decibel or two. I also found what I call a tracking difference between the two radios. The mismatch was the greatest on 20 meters, where the 756 read the same signal as 8 dB stronger on its meter. The difference was about 5 dB on 40 and 15 meters, again the 756 reported a higher value. On the other bands, the two radios basically tracked.

Icom Ic 756 Pro 3

Their S meters indicated the same strength for the same test signal. The S meter on the PRO is also what I would call sluggish. The S meter on the 756 seems to follow syllables in words, and the dits and dahs of CW.